Products Index
General
Power Dividers
Resistive Power Dividers
Reactive Power Dividers
High Power Combiners
Directional Couplers
90 °
3 dB Hybrids
18 0 °
3 dB Hybrids
Switches
Phase Shifters
Limiters
Detectors
Bias Tees
DC Block
Isolators and Circulators
RF Connectors
RF
Terminations
Wireless Components
Frequency Converter with ALC CMI designs various RF, microwave and millimeter wave subsystems which could include frequency down converters and up converters, switches, digital attenuators, phase shifters, etc to realize different functions.
2-Way Broadband CMI designs extremely broadband power dividers. Single 2-way power can covers frequency range from 1 to 40 GHz with excellent VSWR and isolation. The power handling of this power divider is up to 30 W.
5.4-5.9 GHz High Power This high power combiner can combine 3 different frequency signals with 100 W CW power each. It achieves very high isolation and excellent VSWR.
2-30 W Medium Power CMI’s medium power amplifier modules cover frequency range from 200 MHz to 18 GHz. CW output power level is from 1-30 W. Different gain is available depends on customer’s requirement.
3-Way Un-equal CMI designs any power ratio power dividers and combiners from narrow band to octave band for any way signal splitting and combining.
High Power PA Modules CMI’s high power amplifier modules cover frequency range from 1 MHz to 2.2 GHz. CW output power level is 150 W with excellent VSWR and gain flatness.
CM Wireless DC blocks feature low VSRW,
high power and high voltage handling and low insertion loss. Most of the following
models are in stock and ready to ship. Special requirements, such
as different connector type,
and other customer specifications are available on request.
High Power and High Voltage DC Blocks
Model
Datasheet
Freq
(GHz)
Insertion Loss
(dB)
DC Voltage
(Volts)
(Typ)
VSWR
Input
Power
(Watt)
Typ
Max
Typ
Max
KHS504
0.005 - 4
0.18
0.25
200
1.15:1
1.25:1
100
KHS506
0.005 - 6
0.20
0.30
200
1.15:1
1.25:1
100
KHS508
0.005 - 8
0.30
0.35
200
1.15:1
1.25:1
100
KHS512
0.005 - 12
0.30
0.40
200
1.18:1
1.25:1
100
KHV104
0.01 - 4
0.18
0.25
200
1.08:1
1.15:1
100
KHV106
0.01 - 6
0.20
0.30
200
1.08:1
1.15:1
100
KHV108
0.01 - 8
0.30
0.35
200
1.10:1
1.20:1
100
KHV112
0.01 - 12
0.30
0.35
200
1.15:1
1.22:1
100
KHV118
0.01 - 18
0.40
0.50
200
1.18:1
1.28:1
100
KHV126
0.01 - 26.5
0.60
0.80
200
1.25:1
1.35:1
100
KHV130
0.01 - 30
0.65
0.85
200
1.25:1
1.35:1
100
KHV140
0.01 - 40
0.70
0.90
200
1.35:1
1.45:1
100
KHV504
0.05 - 4
0.18
0.25
200
1.07:1
1.10:1
100
Note 1.
Standard finishing is anodized aluminum housing with passivated stainless
steel or tri-alloy plated brass
connectors. Optional finishing with blue epoxy paint per MIL-C-22750 available
on request
